Information About The Wood Charcoal Making Machine

The wood charcoal making machine, also called the biomass carbonization machine, can be used to convert wood chips, tree barks, bamboo chips, tree branches, and agricultural waste into biomass charcoal using a process known as carbonization. Here is the procedure for converting organic matter including plant materials and animal substances into carbon by heating it in the absence of oxygen. It becomes an effective way of producing high-quality and eco-friendly charcoal which can be used as a wide array of purposes.

By investing in a wood charcoal manufacturing machine, you stand to gain significant profits by selling the items you will make. In fact, there is a sought after for charcoal, along with the raw materials can be accessible. What better business opportunity than turning waste in to a product having a high economic value and a variety of uses. What's more, the machine also will give you biogas, tar, and wood vinegar as by-products. Most of these products offer value to the investor.

The Wood Charcoal Making Process

The wood charcoal production process basically involves 3 steps: crushing and drying, carbonization and discharge, creation of the combustible gas, and re-consumption of gas.

But first, there are many important requirements that ought to be met in relation to raw materials.

i) The wood waste materials should not contain moisture content exceeding 15%. Should your raw materials have a higher moisture content, you need to create a drying system.

ii) The types of materials ought not exceed 20 mm in proportions. If they don't meet this standard, you will have to setup a crusher.

With that said ,,  here's what goes on within the wood charcoal making process:

Crushing and drying: As indicated above, step one is to ensure that your wood materials fulfill the expected standards:a moisture content below 15% and size not exceeding 20 mm. The type of material are first crushed and dried inside the drying system.

Carbonization and Discharge: Before any wood chips are fed into the carbonization furnace, it is first pre-heated for a period of one hour. The dried wood materials move onto the feeder using a conveyor belt and so are then fed to the carbonization furnace. After about 20 minutes, the charcoal is discharged.

Manufacture of the Combustible Gas

The creation of the combustible gas begins after 10-20 minutes of feeding the wood materials. The gas then moves to the cyclone dust removal system and spray dust collector where it can be cleaned. It then enters the condenser which separates the wood vinegar and tar. The gas that stays is pushed out of the carbonization furnace by the induced draft fan.

Recycling the Combustible Gas

The ejected combustible gas could be redirected and utilized to heat the carbonization reactor.

The wood charcoal making machine was designed to continuously carbonize wood waste materials. The wood charcoal making machine can discharge the final products even though it is still being fed enhancing the overall efficiency of charcoal production.

The wood charcoal-making machine is certainly a handy piece of equipment for any individual looking to venture in to the biochar selling business.